TX79Z28;33398 said:I had my Camaro in 2K after the second round of blocking and ended up with some rather large bare metal spots on the driver QP. Our temps are not as bad as some of you, but it will not get past high 40s. I plan on getting a small space heater to keep the small area warm (checking with an IR meter) since I only have to shoot epoxy on a very small area of the car. Am I correct in assuming that as long as the affected area is above 65-70 I'm good to go?
Bob Hollinshead;33409 said:electric heating blanket after it is dry to the touch, JC's trick.
- - - Updated - - -
-18F here last night
strum456;33408 said:Just in case you don't know this: the epoxy itself must be up to temperature when it is mixed and sprayed.
strum456;33408 said:Just in case you don't know this: the epoxy itself must be up to temperature when it is mixed and sprayed.