Turbo primer

J

Joe's Notchback

I have fenders that were primed with epoxy waited 24 hours, then sprayed 3 coats of turbo primer 6 weeks ago. I have finally got one fender sanded and would like to put 1 or 2 coats more of turbo primer, but would I have to respray epoxy so I don't run into adhesion problems?

First sanded with 180 to get it flat then went over with 220. Would like to spray 1- 2 coats of turbo then sand with 320.

Joe
 
Like said good to go, you would only need the epoxy if you have some bare metal showing.
 
You must log in or register to reply here.
Back
Top