K
keith_y
Im a 2nd generation auto painter thats been painting professionally for about 3 years and prepping for much longer. Ive left collision for restoration so I need to be able to paint clear "slicker". Ive had so much opinion and "theory" on tip sizes to only confuse me even more. I know that Sata's seem to output more than Iwata per same tip size. Im an Iwata user, LPH400 1.4 and WS400 1.4. Most painters, however, use Sata so the tip size debate has been very, very confusing.
Barry says use 1.4(which I do) but what I dont understand is in the "Adjusting Your Paint Gun" article he says to turn the fluid adjustment all the way in and begin backing out until it sprays properly. So basically Im asking if Im using a 1.4 and dial it in, is that not the same as using a 1.3 or smaller?
Barry says use 1.4(which I do) but what I dont understand is in the "Adjusting Your Paint Gun" article he says to turn the fluid adjustment all the way in and begin backing out until it sprays properly. So basically Im asking if Im using a 1.4 and dial it in, is that not the same as using a 1.3 or smaller?