Seam sealer over Turbo primer

R

Revolver

I've about got the car i'm working on ready for final primer sand and paint. Car was epoxy primed, then primed with Turbo. Do I have to spray the areas that get seam sealer with a coat of epoxy, or can I just lay it over the sanded Turbo? I will be using the Evercoat Maxim 2k epoxy seam sealer. And will the epoxy reduced as a sealer (before base) be good enough over the seam sealer? It's a 72 cutlass and I have the seam at the bottom of the quarter (at the rocker), the whole cowl area, and various other little spots.

Thanks for the help.
 
You can lay over the 2K if it has sat for a day, always best over epoxy but the turbo will handle it if cured.

Epoxy will be all you need over the cured sealer.
 
Thanks, Barry. I've decided to just go ahead and spray some epoxy where I need the seam sealer, just to be safe.


ps, really enjoy your products and customer service. Second to none. Will be ordering more very soon.

Thanks, Gregg
 
You must log in or register to reply here.
Back
Top