question about sata jet5000 B RP paint gun?

M

mattyp

Can i use this gun for everything with the proper nozzles? Epoxy, sealer, base, clear?
 
Yes but I have found you may want a 1.3 for metallic bases. the 1.4 choked in does a good job but takes some fine tuning for tough bases.
 
I would highly recommend the 1.3 nozzle especially if you are new to this. I got both the 1.4 and 1.3 5000RP's and the 1.4 is a fire hose. I find that I use the 1.3 all the time. As for it spraying base the 1.3 would be far better than the 1.4 like Barry said. Personally never have used it for base as I use a 2000 HVLP 1.4 and a 4000 hvlp 1.3 for all my basecoats. But with the 5000RP's atomization it should spray most colors just fine.
 
Chris_Hamilton said:
I would highly recommend the 1.3 nozzle especially if you are new to this. I got both the 1.4 and 1.3 5000RP's and the 1.4 is a fire hose. I find that I use the 1.3 all the time. As for it spraying base the 1.3 would be far better than the 1.4 like Barry said. Personally never have used it for base as I use a 2000 HVLP 1.4 and a 4000 hvlp 1.3 for all my basecoats. But with the 5000RP's atomization it should spray most colors just fine.
Click to expand...
Ok 1.3 it is! Is there any other nozzle that would be key for this gun (primarily for epoxy to base/clear system)?
 
With that gun the 1.3 will work great (with adjustment) for epoxy, base and clear.
 
Good gun for clear...i was gonna get one for clear only but i got a ws400 1.3 set up.
 
You must log in or register to reply here.
Back
Top