J
JCB
I would like to share a problem I had while spraying the bedliner. I mixed up the bedliner just like the tech sheets say to and I was using the correct gun that SPI sells. When I went to shoot it the gun would sputter and some material would come out and then stop. I adjusted the nozzle in and out, adjusted the pressure and even thinned the bedliner some more but none of this helped. It wasn't until I slightly loosened the can from spray head that everything stared spraying like it should. Apparently the bleed hole in the gun is not large enough for the air being displaced.
Just that I would throw this out FYI.
Jim
Just that I would throw this out FYI.
Jim