I thought flash time ( or wait time) was approx 30-45 min ?Between basecoat coats? How would there even be time to? Whether it's clear or base, the gun isn't cleaned until after the last coat to go on.
Follow tech sheet but slower is always better to make sure no solvents trapped. At least that is my practice.I thought flash time ( or wait time) was approx 30-45 min ?
Agreed. I thought I read Barry's recommendation of 30 to 45 min between basecoats. This is what prompted my question.Follow tech sheet but slower is always better to make sure no solvents trapped. At least that is my practice.
The base coats I've used had 10-15 min flash time between coats on tech sheet.I thought flash time ( or wait time) was approx 30-45 min ?
If you are not in a production environment it is a good idea to clean after each coat. Even base. When I'm giving base the full amount of flash time between coats (30 minutes) I will empty my gun back into my mixing cup. Especially with metallics.
I also started using PPS system and cleaning between is quick and easy...Pps cups make this easy. Can pop the cup off plug it and shoot some reducer thru the gun. Quick and easy.