B
BradNes1
Hi guys, I just ordered my first batch of SPI epoxy after reading all of the good reviews. I have the body of my car stripped and was wanting to do my filler work over epoxy. I am having a little trouble figuring out how you guys put your filler over your epoxy and then block it down without going through the epoxy. I will undoubtedly need more than 1 application of filler and I didn't figure you guys are spraying a new round of epoxy every time you do another coat of filler (filler/epoxy sandwich). Please set me straight on the best way to approach this. My initial plan was to spray epoxy, wait 24 hours, and spray the car in polyester primer (it's going to need some serious blocking). I figured the first slight blocking on the polyester would show me where I will need some filler and I could just do my filler over the poly, thus having some material as a buffer between the filler and epoxy when blocking and preventing breaking through the epoxy. Let me know if I'm way off base here.
Brad
Brad