S
SmokeyHaze
Hi guys, I'm restoring a 1973 corvette for my grandfather. I know for corrosion resistant purposes to lay down epoxy on bare metal before doing any mud work, but what about for fiberglass? The car has been in a pretty bad accident at some point in the late 70's and has some panels sectioned in. For the most part the car is really straight, and almost completely stripped down to the glass. It had previously had about 7 good heavy paint jobs over top of the factory silver.
The car needs some work yet to the body before I start priming and blocking. I have a bag of upol fibral, and a gallon of upol dolphin filler. Should I use these before laying the first couple coats of epoxy, or the same as bare metal, epoxy first, then lay filler down? Thanks for the help and input.
-Derek
The car needs some work yet to the body before I start priming and blocking. I have a bag of upol fibral, and a gallon of upol dolphin filler. Should I use these before laying the first couple coats of epoxy, or the same as bare metal, epoxy first, then lay filler down? Thanks for the help and input.
-Derek