S
Steves69LS3
Is it ok to put a small amount of body filler over regular high build primer? There is one tiny area that needs to be reshaped
Thanks
Thanks
underdog;38974 said:I would use evervoat metal glaze (or similar) instead, just for ease of sanding. Hit it with 180 first. And always apply epoxy over it, once cured. Fallowed by your 2k
I would say 90 percent of body shops do it, when I hear people say I would never put a glaze or similar product over 2k or epoxy, I call bs.
If that were the case than they had better have found every single inperfection from a scratch to a pin hole in filler prior to thier choice of primer.
Or they would have to take that spot all the way back down to bare steel. And back up again, Yeah right..