Anybody using a Warwick 904HE/LE with Universal?

P

Pyrosteve

I want to use the universal clear on my car with the Warwick 904. Anyone using this gun? If so any tips on settings etc.? I was planning on using the 1.4 HE (HVLP) needle/nozzle and air cap but I can get a 1.3 or even the LE (LVLP) air cap. Opinions?
 
I never have used it but have adjusted that gun over the phone for a number of people.
The gun works good with a 1.4 but will not spray the clear right with a 1.3.

Make sure there is no internal strainer in gun.
Fan wide open and then turn in 10% (check pattern after all adjustments are made to make sure you are not blowing out the center.
Fluid adjustment turn in and then out 3 turns.
Air at gun is going to work from 24 to 30 LBs so a good starting point is 26 lbs (with trigger pulled.
Make sure scfm or air at wall is 125 lbs or higher.
Hold gun 6" from panel.
 
You must log in or register to reply here.
Back
Top