disregard the above comment regarding the fiberglass. There is in fact what I believe to be a gel coat between the fiberglass and the paint.
So - I am sanding off all the old paint down to the gelcoat with 120 grit. I will give it a quick once over with 320 or 400 and shoot a coat of primer.
Question is still should I shoot one coat of straight epoxy, and do a light blocking? Im not going to block the crap out of this as Ive been told dont bother, fiberglass is wavy anyway. I still think I can get it straighter than it was.
After that straight epoxy coat, and a light blocking - Shoot a seal coat on both the cap and bed. Then, should I really give it one more blocking at 4-600 or so?