R
roddo
I have a sata nr2000 hvlp 1.3 tip I use for base. Usually I use DBC but i tried pro spray. I was shooting 040 toyota white. I noticed it was a lot more peely than I normally get. I reduced 1:1 with slow reducer with 1 ounce clear activator per RTS quart of base.Shop temp was cold at 61 degrees. 2 1/2 turns out on fluid fan 90-95% full open spraying 24psi at gun medium speed about 5" from panel. Tried increasing air to 29psi and added about 1-2 extra ounce of reducer per qt. still no luck.Base seems a little thick to me?? Peel is not bad but not as flat as I usually spray. Any suggestions? Thanks for any help, much appreciated!