'68 Coronet R/T
Oldtimer
I need to touch up a few spots on my recent Flame Red paint job. Is there a formula for mixing base, clear and reducer to use for touch ups?
Thanks for the mix ratio. I have experimented in the past but was trying to reduce the base 1:1 and then add the clear.i usually mix base and clear aprox 50/50. no reducer in either one before mixing. you want it thick as possible.
i use these. i have a big case of them. they are great, use them all the time and you just toss them when done. that one posted above looks interesting. never seen one like that. only downfall really is that you have to clean it.
E-Z Mix 78000 E-Z Dabber, Vial/40 | JENSEN Tools + Supply
www.jensentools.com
Don do you have a link to the squirt bottles you use. I am having trouble finding some suitable for solvents to replace the old ones I had.I clean it with reducer in a squirt bottle I use for my spray guns.
Here you go Chris. You can probably find it for less.Don do you have a link to the squirt bottles you use. I am having trouble finding some suitable for solvents to replace the old ones I had.
Saw him using the paint pen againI can’t answer your question but I got one of these for chip repair after seeing a guy using one on Instagram. It works very well.
Detailing Fine Line Fluid Writer Paint Applicator Pen | Precision Touch Up Pen | eBay
Thin the paint to a watery consistency. Fill the pen using your brush tip loaded with paint. Hold it like a pen and draw evenly over the surface, allowing the paint to glide gently.www.ebay.com
Don