Y
y5mgisi
I just stripped the roof of the truck i am painting which was heavily surface rusted. Thousands of very very shallow pits. I think the best way to "fix" this issue is as follows, and please correct me if any of it is incorrect at all.
1. Apply oshpo and work it in and around with a red scotchbrite pad ensuring it does not dry.
2. Hose off the surface with water.
3. Blow dry with leaf blower/compressed air.
4. Sand with 180 on a DA.
5. Solvent W&G remover.
6. Waterborn W&G remover
7. Apply Epoxy.
Does that sound accurate?
Thank you!
1. Apply oshpo and work it in and around with a red scotchbrite pad ensuring it does not dry.
2. Hose off the surface with water.
3. Blow dry with leaf blower/compressed air.
4. Sand with 180 on a DA.
5. Solvent W&G remover.
6. Waterborn W&G remover
7. Apply Epoxy.
Does that sound accurate?
Thank you!