R
roddo
I am going to try the Iwata 400LPH 1.4 with purple cap for basecoat instead of my nr2000. Shot a fender last night with the following gun settings 2 1/2 turns out on fluid,
fan open all the way then turned in 1/2 turn, distance 4", air pressure around 23-24 psi, slow speed. Went on pretty good but drier then it should. I am trying to dial in the fan adjustment down to 90% fan from wide open per Barry K's instruction. Having a hard time judging 90% when spraying pattern on paper. Can anybody tell me approx how much to turn fan adjustment in from fully open to achieve 90% or maybe what setting you use that works good for this Iwata setup? Any suggestions are greatly appreciated. Thanks:encouragement:
fan open all the way then turned in 1/2 turn, distance 4", air pressure around 23-24 psi, slow speed. Went on pretty good but drier then it should. I am trying to dial in the fan adjustment down to 90% fan from wide open per Barry K's instruction. Having a hard time judging 90% when spraying pattern on paper. Can anybody tell me approx how much to turn fan adjustment in from fully open to achieve 90% or maybe what setting you use that works good for this Iwata setup? Any suggestions are greatly appreciated. Thanks:encouragement: