Doing some repair on a special car that got some trailer damage. It has a lime green colored primer that I know isn't variprime etching primer. This stuff is colored like a lime green chrysler. It has the green primer followed up by some featherfill looking stuff with a yellow 2k urethane primer. I do know the topcoat system was RM so I'm thinking the underlayment might be RM also.
I've sanded the repair areas down to bare and feathered all the filler but I'm trying to decide if I want to spray epoxy over it wondering if it might be an etch or just go to filler.
It's a shame as the finish on the car is crawling all over the place. It was restored less than 10 years ago and probably a lot sooner, just can't remember. Loaded with poly filler. Rediculous as each damaged part is loaded poly and cracked wherever the damage is.
I'd love to seal it with epoxy but I might play it safe and use filler and then epoxy over the finished filler.
I've sanded the repair areas down to bare and feathered all the filler but I'm trying to decide if I want to spray epoxy over it wondering if it might be an etch or just go to filler.
It's a shame as the finish on the car is crawling all over the place. It was restored less than 10 years ago and probably a lot sooner, just can't remember. Loaded with poly filler. Rediculous as each damaged part is loaded poly and cracked wherever the damage is.
I'd love to seal it with epoxy but I might play it safe and use filler and then epoxy over the finished filler.