Compound that Bonds the Hood to Inner Structure?

[rossta86]

I've been painting my 78 Ford truck in pieces and I'm on to the hood. These hoods have a tendency to rust from the inside out, especially at the front lower edge. Even hoods (from my neck of the woods) that appear in good shape externally still always seem to leave rust flakes on the inner fenders when you shut them. As such, I got the inner support and outer skin separated. I'll media blast the rusted areas and strip the rest with a DA, then epoxy prime and reassemble. What is used to "glue" the inner structure to the outer skin where it is not spot welded?

 

[crashtech]

SEM 39337

Equivalent products are also made by other manufacturers, but the SEM is what I use.

 

[Bob Hollinshead]

Anti flutter foam http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_RJH9U5230GE3E02LECIE20S4K7000000_nid=KJ7PXGVZX0beQH8HT14PGTgl

http://www.kolorhouse.com/fus-124.html

http://apps.sherwin-automotive.com/products/show_product.cfm?product=FU124

 

[Senile Old Fart]

Anti flutter foam http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_RJH9U5230GE3E02LECIE20S4K7000000_nid=KJ7PXGVZX0beQH8HT14PGTgl

http://www.kolorhouse.com/fus-124.html



http://apps.sherwin-automotive.com/products/show_product.cfm?product=FU124

Bob, Is it safe to assume these will not "push" a panel out of shape as it expands?

 

[Bob Hollinshead]

I've used the Duramix version a few times and it worked fine. I've also tried a few other products that didn't work well especially when the car was in the hot summer sun.

 

[rossta86]

Exactly what I was looking for, seems kind of obvious now! Thanks!