I'm painting a hood from a 62 corvette that has already been blocked down to 600 grit exposing areas of bare glass, but the panel is straight and smooth.
Would I shoot a couple of coats of epoxy, then 2k sealer, base and clear? Can I do it without any presswork in between the epoxy and 2k other than the flash time. I also though of shooting the epoxy reduced as a sealer? Any advise.
Would I shoot a couple of coats of epoxy, then 2k sealer, base and clear? Can I do it without any presswork in between the epoxy and 2k other than the flash time. I also though of shooting the epoxy reduced as a sealer? Any advise.