No windshield washers?
I don't see a link?? 3M would be fine. Transtar is usually cheaper and just as good. I included the part numbers in my post above.Thank you, Chris. I Goggled cavity wax and found this kit from 3M.
Is this acceptable?
I bought this tool to punch circles out of sheet metal when filling some holes just like that.
It worked great!
I have the 3M cavity wax and wands all ready to go for the quarter panel, cowl and assorted voids. But won't use it until all paint/clear is done.I would not use cavity wax there. It will act as a dirt magnet and you will see it through the grille imho. I would use epoxy.
When I do use cavity wax I do it when all the paint work is complete.
Don
I have the 3M cavity wax and wands all ready to go for the quarter panel, cowl and assorted voids. But won't use it until all paint/clear is done.
Probably will spray it while waiting 2 weeks after spraying clear before cutting/buffing.
No way I want that wax anywhere near a surface that will be painted.
Since Dean wouldn't rent me his hole punch tool for the day (wink wink ), I ended up making my own plugs.
Picked this tip up from that guy in Canada, Fritz, I believe is his name.
Used a welding stud and welded it to some 19 gauge. Then cut a square out of it and chucked it up in a drill. Using my die grinder, grinded it down to the desire circumference.