Sprayed My 2K High Build Today

R

Ricker

I sprayed 3 coats of SPI 2K High Build primer today on the truck bed. Sprayed really good. I waited 30 min. between coats and I'll start my block sanding tommorrow. I was thinking of starting to block sand with 80 grit, followed with 180 grit and then 320 before spraying a coat of reduced epoxy for a sealer. Sound ok?
 
Ok, I've got everything block sanded. I had some low spots that I fixed with filler and some high spots that was fixed with hammer and dolly. Sprayed another coat of high build and that was block sanded down. Everything looks nice and smooth. This weekend I'm planning on a coat of epoxy to hold it over until I'm ready to bc/cc next spring.
 
You must log in or register to reply here.
Back
Top