R
Ricker
Hi everyone, I'm new here and I'm also new to painting. I have a '97 Dodge Ram that I have completly disassembled and had the frame blasted and powder coated. The frame, suspension, and driveline are now reassembled with new or the original parts that was cleaned, blasted, and repainted. Now I'm starting the body. The cab is completly stripped. I drilled out the spot welds on the rockers pinch weld to open them up and drilled out the spot welds and removed the cab mounts. I cleaned and had all this as well as the bottom of the cab blasted. I got some SPI epoxy primer from someone off ebay and with this and some weld-thru primer welded everything back together and then sprayed the whole bottom and inside floor of the cab with the rest of the epoxy primer. I had some Upol Raptor bedliner so I also sprayed this on the whole bottom and cab floor. After I get some more SPI epoxy primer I want to spray the whole cab. I started sanding the exterior with 180 but I'M not sure what to do about the bedliner. How do I prep this to spray with epoxy, or should I not worry about spraying the bedliner? Will the epoxy stick to the bedliner without prep?