Mixed Slick sand wrong now what?

6

67fastbackgt

So I screwed up and mixed up some slick sand wrong:( I mixed 16 ounces with only 1/8 of a tube of hardener...should of been 1/2 a tube.. don't know what in the hell I was thinking but it's done now. been almost 24 hours and can't cut it with paper yet. Am I just screwed? What should I do from here wait it out? will it harden?Thanks guys..
 
I'm sure the experts will chime in. But since its still soft I'd try wiping it some lacquer thinner to see if it will come off.
 
You have to remove it, and it will be a mess but it has to come off. I had some bad MEKP once and ended up with the same uncured mess. I washed it off with thinner to remove 99% of it off then sanded and started over. You might want to try a plastic scraper first then a solvent wash.
 
Sorry guys I meant to update this but the site was down for a while. After about three days (with the heat turned to 70)it finally dried enough to where i could actually sand it off! I took every ounce of it off just so I wouldn't have issues down the road. But if anyone messes up like I did it's good to know that it will kick eventually!
 
You must log in or register to reply here.
Back
Top