Coating inside door pillars

[aldefed]

What do you guys use for coating interior areas like door pillars or inside frame rails? Also, how about places where it is near impossible to get a spray gun into? I did brush the epoxy into the bottoms of the quarters but there are still areas where I cannot get a brush into. Does someone make a spray paint that has a wand to direct the paint to very specific areas?

 

[dhutton01]

Cavity wax and a wand on a schutz gun. I use a 3M wand but I think Eastwood sells one.

Don

 

[MJM]

Do not use cavity wax until you are completely finished with spraying either your base coat / clear or single stage.

It's a contamination that can sacrifice your finished coat. Once your finished coat is done, then cavity wax.

 

[MJM]

What do you guys use for coating interior areas like door pillars or inside frame rails? Also, how about places where it is near impossible to get a spray gun into? I did brush the epoxy into the bottoms of the quarters but there are still areas where I cannot get a brush into. Does someone make a spray paint that has a wand to direct the paint to very specific areas?

A funnel and a straw to direct the flow of paint in those tight areas you can't spray or get a paint brush in. A syringe with a long needle might work too.

 

[MikeK]

Anything you can easily manipulate, rotate, pour it in at a 50% reduction and let it slosh around. Really good for Doors,fenders,Anything loose.

Couple 'things I cobbled up for this. And you all probably thought I was B.S.ing you.
Got the preval idea from a wax wand actually. Just improvised it.
The jug was for continuous spraying in a mini gun style doing tube frames. You ever enter a tube frame chassis,you'll understand. ANY which Way you want and not spill a drop.