Rbm Professional amateur Sep 14, 2022 #1 if I use screws to hold a bonded panel on while curing, can I go back and weld the screw holes up without affecting the bond ? Thx
if I use screws to hold a bonded panel on while curing, can I go back and weld the screw holes up without affecting the bond ? Thx
crashtech Combo Man & Mod Sep 14, 2022 #3 The glue will burn up around the screw holes, obviously. So that will have an effect. Depending on how close the screw holes are to the edge of the panel, you may end up with gaps in the line where there is no glue, just ash.
The glue will burn up around the screw holes, obviously. So that will have an effect. Depending on how close the screw holes are to the edge of the panel, you may end up with gaps in the line where there is no glue, just ash.
dhutton01 Backyard Hack Sep 16, 2022 #6 Fill the hole with a little panel adhesive and sand it flush when cured. A little hole like that won’t map once you have body worked it. Don
Fill the hole with a little panel adhesive and sand it flush when cured. A little hole like that won’t map once you have body worked it. Don