Countrysquire
New Member
Need help. Used Universal Clear for the first time this afternoon and have a problem. Spraying over Shopline base coat which had dried for 90-100 minutes before applying the clear. About 5 seconds after spraying, the clear had dozens of little bubbles pop up. I tried spraying a plastic plate I had in the shop and there was zero bubbles. It is only happening on the base coat. PPG says you can topcoat after 20 minutes, so I thought waiting nearly two hours would be plenty of time for it to flash.
Am I right in thinking that it’s a reaction with the base coat? I guess the bigger question is how do I fix it.
Thanks for any help.
Am I right in thinking that it’s a reaction with the base coat? I guess the bigger question is how do I fix it.
Thanks for any help.