Sandblasted jambs and epoxy

[endrivia]

Do i need to sand freshly sandblasted door jambs with 80 grit before spraying epoxy primer or can i spray the epoxy right over the metal after sandblasting

 

[Chris_Hamilton]

As long as you haven't touched it with your bare hands and you used fresh media, you can blow it off and go to epoxy. No need to sand and don't wipe it down as the towels will tear and catch on the surface.

 

[Lizer]

The only reason I’d sand it is if there were a severe media profile and I wanted a smoother surface.