Remove overspray from black rubber

[RosharonRooster]

missed some spots on my masking work. Have a little over spray on the rubber gaskets. Tried a rag with reducer and thinner. No luck. Any advice?

 

[Chris_Hamilton]

If it's epoxy thinner/reducer won't touch it. You might be able to work it off with a exacto knife. If it's clear or base, Use slow urethane reducer. It won't come off imediately, you will need to keep going over it. It will start to soften then you can try and scrape it off.

 

[RosharonRooster]

If it's epoxy thinner/reducer won't touch it. You might be able to work it off with a exacto knife. If it's clear or base, Use slow urethane reducer. It won't come off imediately, you will need to keep going over it. It will start to soften then you can try and scrape it off.

I'll keep at it

 

[RosharonRooster]

Forgot to follow up. I was able to get the overspray off. Took a little effort but it cleaned up using reducer.