Here's a dent I'm head scratching over. One of you guys will have been there and done that. The bed rail of this pickup has had something dropped on it and it squished the tube about a foot in from the end. I have an old axel I have rounded the end on that I use to chase wrinkles and pry with, and it barely fits in the end of the tube. The metal is pretty thick where it was rolled to form the tube. The prior shop just added bondo... I was going to heat the area and try tapping the edges of the dent as I tapped the rounded axle in, but I have nightmares of the metal cooling and shrinking and trapping the bar stock.