E
Eleanor
Hi, I was wondering if anyone could help me out here. I have a body kit rocker panel moulding that is warped along the top edge ... probably the whole thing. It's like the top part of that moulding that goes against the rocker is warped pretty much opposite of the rocker. The actual car rocker panel does have a bow out from back to front. The back part of the rocker moulding has a 90 degree angle on it that slides up into the back wheel fender flair moulding so it has to be solid from there forwards to the front.
Anyway, is there a way to fix this by heating it or do I need to cut it somehow and release the tension and rebond? If so could someone please give me advise on how to do this properly? I posted some pics earlier on another thread but here are some more. I would need to know what products to use as well as proper tools etc for doing this job which the body shop should have done in the first place correctly. Anyhow, any help would sure be appreciated. Thankyou.
Anyway, is there a way to fix this by heating it or do I need to cut it somehow and release the tension and rebond? If so could someone please give me advise on how to do this properly? I posted some pics earlier on another thread but here are some more. I would need to know what products to use as well as proper tools etc for doing this job which the body shop should have done in the first place correctly. Anyhow, any help would sure be appreciated. Thankyou.