Horse Trailer Restoration

I bought this horse trailer and have been working to restore it back to like new condition.
Didn't take any before pictures :( since I dug right in to the task at hand.
Stripped out the old flooring, cut out rusted metal in the right frame rail and along the lower front wall at the floor area then welded in some new.
Removed all the cushions and pads, straightened the center divider, then sanded and blasted as much rust as I could from the frame and suspension.
Used some Ospho on the rust I could not get to and then applied fresh the next day and scrubbed with scotchbrite and dawn dish soap to neutralize.
Next day I painted the frame with SPI black epoxy using a brush. Bought some new 2"x12" boards for flooring and painted with Kilz Sealer then installed using stainless steel carriage bolts through the frame rails.
After prepping the walls and ceiling I sprayed everything including the floor boards with two coats of unreduced SPI white epoxy. (No clear coat just epoxy) Took a full gallon mixed.
Put new foam and vinyl fabric on the dividers and new 3/4" mat flooring on the floor and walls.
Anyway here is the finished inside.
P1010008-4.jpg

P1010007-6.jpg


Now to move on to the outside which will be SPI silver and Limco Supreme Plus for the blue metallic with SPI production clear coat topping it off.
 
Back
Top