Epoxy Primer Dry Spray

[ahhgaragetime]

I have a small section on my car that I didn't get the epoxy on heavy enough or I didn't have the gun at the correct distance. I'm left with a bit of dry spray, So my question is what should I do from here? Sand most of it off and recoat or just sand lightly and re-spray epoxy? Sand lightly and 2k fill primer over it. Any concerns about future problems down the road with leaving some dry spray?

Since this is the first layer of my paint job, I thought I should ask for advice. I don't mind doing it again as this is just a hobby for me.
Thanks,
Tom

 

[Barry]

If next step is 2K primer then do not sand just apply the primer, you have nothing to worry about if primer is next step.
Reason we don't want to sand is one it will make no difference and second we want the mils of the epoxy.