Epoxy and 2K high build question

Hello
I was afraid you would say that. That is going to take forever to do. Thanks for having it noted in specs so that I did not go forward. What is best method you recommend for taking acid treated metal to bare metal?
 
I feel your pain, but much better now than after it is painted. Imagine getting it all done, assembled, looking good, feeling proud, then getting a rock chip and the paint just starts peeling off. You have come to the right place for advice on making a job look good and last. Go to the home page and read the article on the perfect paint job. That will give you a good road to follow, then go to the tech manual and read about each product you plan to use. There are answers to almost any question you may have already on the forum section, or you can ask here, or can actually talk to the owner. Nowhere will you find more QUALITY information than here, and the products are second to none, reasonably priced. I don't know how the encapsulator sands, but probably not good. If you had surface rust, your best bet is probably blasting it off.
 
Back
Top