U
ugotd8
Hi all, total n00b here. I have the SPI intercoat clear and want to make a transparent black to go over metalflake to darken what I have now. I cannot find a kandy black and have read of using a toner or dye mixed with the intercoat to darken silver to become charcoal or somewhere in between while letting the flake show thru. Also, since I'm a n00b, I'd like it to work so each coat I add will darken further so I can just control shades by the number of coats. Anyone know the best technique for doing this ? Here's a picture of what I'm trying to do more or less:
And here is what I have now, basically HOK mini flake in intercoat with a couple of coats of universal clear:
I plan to scuff the clear with 600 and then tape out panels to darken with intercoat mixed with something. Thanks in advance!
And here is what I have now, basically HOK mini flake in intercoat with a couple of coats of universal clear:
I plan to scuff the clear with 600 and then tape out panels to darken with intercoat mixed with something. Thanks in advance!