B
BallsOutPerformance
Ive never sprayed a candy but im planning try a few new things after i finish this current project. Ive always sprayed all my products at 50% overlap with fluid setting at wide open. Air preasure varying some depending on product. Ive been able to acheive good finishes like this. For metallics, any blotchiess is addresses with an orientation coat.
So my question relates to overlap. I know candies generally are applied at 75% overlap. My question is how do i transition to 75% overlap without flooding on too much material. My guess is to either speed up or turn the fluid down and stay at my current speed. I dont want to have to speed up, so I assume if i turn my fluid down and overlap at 75% ill be able to cover uniformly without drowning the panel and running the base?
I hope you can understand my question. Im not the best at explaining sometimes and I can become wordy. Thank you.
So my question relates to overlap. I know candies generally are applied at 75% overlap. My question is how do i transition to 75% overlap without flooding on too much material. My guess is to either speed up or turn the fluid down and stay at my current speed. I dont want to have to speed up, so I assume if i turn my fluid down and overlap at 75% ill be able to cover uniformly without drowning the panel and running the base?
I hope you can understand my question. Im not the best at explaining sometimes and I can become wordy. Thank you.