epoxy primer

I'm working on a hood I have my filler as base then epoxy then 2k high build now I am glazing lows in my hood, what I am finding out is I am having to use alot more glazing putty than I intended on to get the hood straight, I am using pro glaze which has in the material sheet that it can be used...

Hello all; So been lurking on the forum for six months or so but this is my first post. I have a 2007 GMC sierra classic I’m repairing for my sons first vehicle. I found SPI while researching how to get the frame rust dealt with and coated that with epoxy primer. Really liked it and want to buy...

I'm about to paint my van which is my first paint job. Equipment 40 husky air compressor R500 Linear blocks Product White epoxy White SS Currently the van is about 85% done in white epoxy.. My process was to shoot it then sand with 220 to find the lows. I filled the lows with evercoat rage...

This summer I decided to paint my sprinter, it's the first vehicle I've ever painted. The sprinter is my daily driver so I opted to use epoxy and no 2k... I have all the dents out and it's looking pretty good in all white epoxy. It's turned out better than I thought and now I don't want to...

Looking for advice on spraying the SPI EPOXY after having about 3/4 ounce leaked out the bottom of the gal container that i think must be a binding agent? Mix and spray or garbage can?

Greetings everyone! Here's my situation: Several months ago I applied LizardSkin products on my C3 corvette, inside and out, as noise and heat barriers. Then I covered them with several coats of SPI epoxy primer. The result is highly textured as you can see on the pictures. The interior will be...

I ran out of the black SPI epoxy primer. I think I’ll need another quart but I don’t want to wait a week to get more shipped to me and which would require me to do more prep work for mechanical adhesion. What’s an alternative I can get at an automotive paint store? Lots of turn over at my...

need to epoxy primer ** 650 square feet ** of 32 year old aluminum bodied class 8 straight truck (the $100 dollar Rustoleum roll-on job was nixed, don't ask) this is going to cost a few dollars more, but need to keep costs down as much as possible, very minimal body work needs to be done, most...

I have a couple of general questions for those here I was hoping you guys could help answer. I am planning to use the epoxy primer (already bought the gallon size duo) on my '02 Jeep TJ's frame for helping prevent rusting. I realize most folks here are perfectionists who are restoring...

Hello guys, I'm new to this forum and have no experience painting with modern products as I haven't painted a car in over 30 years. I just got my car back from being dipped here locally in Wisconsin. It is a 63 Falcon Sprint restomod. I have it on a rotisserie and am preparing for SPI epoxy...