B
Bennett Bryner
Just bought a new house with an interesting garage setup. It has a 2.5 car garage with a "1.5" car sized garage attached to the back of it. Plan is to put compressor/tools/mixing area in the back portion, and split the font 2.5 garage into two areas. One for painting and one for mechanic work. Max line length would be about 50ft from compressor. I have been looking at the MaxLine kits from RapidAir. Compressor is a 5hp 60gal C-Aire. Probably going to have 3 drops total.
Would 1/2" ID line be sufficient or should I step it up to 3/4" ID? The drops would then go to 3/8" flexzilla. I am a one man deal so I would not be using multiple air tools at once.
Any input would be appreciated.
Would 1/2" ID line be sufficient or should I step it up to 3/4" ID? The drops would then go to 3/8" flexzilla. I am a one man deal so I would not be using multiple air tools at once.
Any input would be appreciated.